Bostik Wood Floor Glue - One question I have already been asked time and again over the years working in the wood flooring business is; can my old fitted wooden floor be sanded and refurbished? Most folks know that parquet floors or first floor boards can be sanded back to create a lovely finished floor, but what to do having a fitted wooden floor is a little more confusing.
You need to learn which kind of floor you've got, & most importantly it is wood. I am afraid the sole option would be to replace it, in case your floor is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it's basically a wood effect print stuck to an MDF or plywood board using a lacquer on top, sanding it'd sand off the paint and destroy the floor.
There are just two types of fitted wooden flooring; engineered and solid wood flooring and also the great news is, both may be sanded and refurbished to look as new as the day. As it includes a similar building engineered wooden flooring will often be mistaken for laminate. Engineered wood flooring includes a thin layer of real wood, typically between 3-5 mm bonded to a base of either MDF or ply board, because of its building and that it is fitted together using a tongue and groove, additionally, it remains really flat.
This means if sanded accurately you ought to only have to sand off significantly less than the usual millimeter, or so the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it is going to have a very similar appearance to engineered on the surface, but it'll be built completely of just one piece of wood from the top layer of the base. Solid wood flooring will inevitably cost more to buy and is more expensive to make, but in my opinion, it isn't as good engineered as it's more prone to warping.
Tags: #bostik best wood floor glue #bostik best wood flooring adhesive 5 gallon #bostik best wood flooring adhesive coverage #bostik wood flooring urethane adhesive #bostik's best wood flooring urethane adhesive cure time