Sweeper For Wooden Floors - One question I have already been asked time and again over the years working in the wood flooring business is; can my old fitted wooden floor be sanded and refurbished? A lot of people have a wooden floor in their own house that's been down for 6-10 years that is appearing tired, dull, has stains or scratches in and has definitely seen better days. A lot of people realize what things to do using a fitted wooden floor is a little more confusing, although that first floor boards or parquet floors might be sanded back to make a finished floor that is wonderful.
Firstly you should determine that it's wood, and most importantly what kind of floor you've got. I'm afraid the only real option is to replace it if your floor is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it is basically a wood effect print stuck to an MDF or plywood plank using a lacquer on top, sanding it would sand the paint off and ruin the floor.
There are two kinds of wooden flooring that is fitted; the great news and solid and engineered wood flooring is, both refurbished and could be sanded to look as new as the day they were fitted. As it features an identical building, engineered wooden flooring will often be mistaken for laminate. Engineered wood flooring includes a thin layer of real wood, typically between 3-5 mm bonded to your base of either MDF or ply board, due to its building and that it's fitted together using a tongue and groove, additionally, it stays quite level.
This implies if sanded accurately you must just have to sand off significantly less than a millimeter, therefore the floor can usually be sanded up to 3 times If your floor is solid wood flooring it's going to have a very similar look to engineered at first glance, but nevertheless, it'll be assembled completely of one piece of wood from the top layer of the base. Solid wood flooring is more expensive to make and will inevitably cost a lot more to buy, but for me, it is not as good a product as engineered as it is more vulnerable to warping.