Epoxy Floor Coating For Wood - One question I have been asked time and again over the years working in the wood flooring industry is; can my old fitted wooden floor be sanded and refurbished? A lot of folks realize that first floor boards or parquet floors may be sanded back to produce a finished floor that is wonderful, with a fitted wooden floor is a little more confusing, but what things to do.
You have to find out which type of floor you might have, & most importantly that it's wood. I'm afraid the only real alternative would be to replace it, if your floor is a wood effect laminate then. Laminate flooring comes in varying level of quality, but most of the time it's essentially a wood effect print stuck to either an MDF or plywood board using a lacquer on top, sanding it'd sand off the paint and destroy the floor.
There are just two kinds of fitted wooden flooring; the good thing and engineered and solid wood flooring is, both refurbished and may be sanded to look as new as the day. As it includes an identical building, engineered wooden flooring can sometimes be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, usually between 3-5 millimeters bonded to some foundation of either MDF or ply board, due to its building and that it's fitted together using a tongue and groove, it also stays really flat.
This implies if sanded accurately you must just have to sand off significantly less than the usual millimeter, or so the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it's going to possess a similar appearance to engineered at first glance, but nevertheless, it will be constructed entirely of just one piece of wood from your surface of the foundation. Solid wood flooring is more expensive to make and will inevitably cost more to purchase, but in my opinion, it is not as good a product as engineered as it's more inclined to warping.