Best Looking Laminate Wood Flooring - One question I've been asked time and again over the years working in the wood flooring industry is; can my old fitted wooden floor be sanded and refurbished? Many people have a wooden floor in their house which has been down for 6-10 years that's looking tired, boring, has spots or scratches in and has definitely seen better days. Most folks realize that original floor boards or parquet floors can be sanded back to produce a finished floor that is wonderful, using a fitted wooden floor is a bit more confusing, but things to do.
Firstly you should determine what kind of floor you might have, & most importantly that it's wood. I'm afraid the only option would be to replace it, in case your floor is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it's actually a wood effect print stuck using a lacquer on top to either an MDF or plywood board, sanding it destroy the floor and would sand the paint off.
There are two types of fitted wooden flooring; the good news and also engineered and solid wood flooring is, both refurbished and can be sanded to look as new as the day. As it features an identical building, engineered wooden flooring can occasionally be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, generally between 3-5 millimeters bonded to your base of ply or MDF board, because that it is fitted together using a tongue and groove and of its building, it also remains quite flat.
This implies if sanded correctly you ought to only have to sand off significantly less than a millimeter, so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it's going to have a very similar appearance to engineered on the surface, but nevertheless, it will be built entirely of one piece of wood from your surface of the base. Solid wood flooring certainly will necessarily cost a lot more to buy and is more expensive to make, but for me, it's not as great a product as engineered as it's more vulnerable to warping.