Best Solid Wood Floor Adhesive - One question I have been asked time and again over the years working in the wood flooring industry is; can my old fitted wooden floor be sanded and refurbished? A lot of people have a wooden floor in their house which has been down for 6-10 years that is appearing tired, dull, has stains or scratches in and has definitely seen better days. Many folks realize that original floor boards or parquet floors might be sanded back to make a finished floor that is lovely, with a fitted wooden floor is a little more confusing, but what things to do.
Firstly you should determine that it is wood, and most importantly what sort of floor you might have. I'm afraid the sole alternative is to replace it, in case your floor is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it's essentially a wood effect print stuck using a lacquer on top to an MDF or plywood board, sanding it'd sand the paint off and destroy the floor.
There are two kinds of fitted wooden flooring; engineered and solid wood flooring and also the great news is, both refurbished and might be sanded to look as new as the day. As it has an identical building engineered wooden flooring can sometimes be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, typically between 3-5 millimeters bonded to your base of either ply or MDF board, because of its building and that it's fitted together using a tongue and groove, it also remains really flat.
This means if sanded correctly you must just need to sand off less when compared to a millimeter, therefore the floor can usually be sanded up to 3 times If your floor is solid wood flooring it's going to employ a similar look to engineered at first glance, but it'll be built completely of just one piece of wood in the top layer of the base. Solid wood flooring is more expensive to make and will necessarily cost more to purchase, but in my opinion, it isn't as great engineered as it's more prone to warping.