Durable Wood Floors Brookfield - One question I've been asked time and again on the years working in the wood flooring business is; can my old fitted wooden floor be sanded and refurbished? A lot of people have a wooden floor in their own house which has been down for 6-10 years that is looking tired, boring, has scratches or stains in and has definitely seen better days. A lot of people realize what things to do having a fitted wooden floor is a bit more confusing, although that first floor boards or parquet floors can be sanded back to create a finished floor that is wonderful.
You must discover what sort of floor you've got, and most importantly that it's wood. I'm afraid the sole alternative would be to replace it, in case your floor is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it's basically a wood effect print stuck with a lacquer on top to an MDF or plywood board, sanding it ruin the floor and would only sand the paint off.
There are two kinds of wooden flooring that is fitted; engineered and solid wood flooring and also the good news is, both may be sanded and refurbished to look as new as the day. As it includes an identical building, engineered wooden flooring can occasionally be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, generally between 3-5 millimeters bonded to your base of MDF or ply board, because that it is fitted together with a tongue and groove and of its building, it also remains quite level.
This means if sanded right you should only need to sand off significantly less than a millimeter, or so the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it is going to have a very similar look to engineered on the surface, but nevertheless, it will be constructed completely of just one piece of wood from the surface of the base. Solid wood flooring is more expensive to make and will necessarily cost a lot more to buy, but in my opinion, it's not as good a product as engineered as it's more prone to warping.