Sealed Wood Floor Polish - One question I've been asked time and again over the years working in the wood flooring business is; can my old fitted wooden floor refurbished and be sanded? Many folks realize that first floor boards or parquet floors can be sanded back to create a finished floor that is lovely, having a fitted wooden floor is a little more confusing, but things to do.
Firstly you must determine that it is wood, & most importantly what kind of floor you might have. I am afraid the only alternative is to replace it if your floor is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it is essentially a wood effect print stuck using a lacquer on top to an MDF or plywood plank, sanding it would sand the paint off and ruin the floor.
There are just two types of fitted wooden flooring; solid and engineered wood flooring as well as the good news is, both refurbished and may be sanded to look as new as the day they were fitted. As it has an identical construction engineered wooden flooring will often be mistaken for laminate. Engineered wood flooring includes a thin layer of real wood, usually between 3-5 millimeters bonded to a foundation of either MDF or ply board, because of its construction and that it is fitted together using a tongue and groove, additionally, it remains quite level.
This means if sanded accurately you must only need to sand off significantly less when compared to a millimeter, so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it will have a very similar look to engineered at first glance, but it'll be constructed completely of one piece of wood from the top layer of the foundation. Solid wood flooring certainly will inevitably cost a lot more to buy and is more expensive to make, but for me, it isn't as good a product as engineered as it is more vulnerable to warping.