Polish Wood Floor Machine - One question I've been asked time and again on the years working in the wood flooring business is; can my old wooden floor that is fitted be sanded and refurbished? Many people have a wooden floor in their own house which has been down for 6-10 years that is appearing tired, lifeless, has spots or scratches in and has definitely seen better days. Most folks realize things to do having a fitted wooden floor is a bit more confusing, although that first floor boards or parquet floors may be sanded back to produce a finished floor that is lovely.
You have to determine which kind of floor you've got, & most importantly that it is wood. In case your floor is a wood effect laminate then I'm afraid the only option would be to replace it. Laminate flooring comes in varying level of quality, but most of the time it is basically a wood effect print stuck using a lacquer on top to either an MDF or plywood board, sanding it'd only sand off the paint and destroy the floor.
There are just two forms of wooden flooring that is fitted; the good thing and also solid and engineered wood flooring is, both refurbished and might be sanded to look as new as the day they were fitted. As it has a similar construction engineered wooden flooring will often be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, typically between 3-5 mm bonded to your foundation of either ply or MDF board, due to its construction and that it is fitted together using a tongue and groove, it also remains very flat.
This means if sanded right you must only have to sand off significantly less than a millimeter, or so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it will have an extremely similar appearance to engineered at first glance, but nevertheless, it will be assembled entirely of one piece of wood from your face of the foundation. Solid wood flooring will necessarily cost a lot more to purchase and is more expensive to make, but in my opinion, it is not as great a product as engineered as it is more inclined to warping.