Wickes Solid Wood Floor Adhesive - One question I have already been asked time and again over the years working in the wood flooring business is; can my old fitted wooden floor refurbished and be sanded? Several people have a wooden floor in their house that's been down for 6-10 years that is appearing tired, dull, has scratches or spots in and has definitely seen better days. Most folks know what to do with a fitted wooden flooring is a little more confusing, although that original floor boards or parquet floors could be sanded back to make a finished flooring that is lovely.
Firstly you must learn which kind of flooring you've got, & most importantly it is wood. I am afraid the only real option is to replace it if your flooring is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it is basically a wood effect print stuck using a lacquer on top to either an MDF or plywood board, sanding it ruin the floor and would only sand the paint off.
There are two forms of wooden flooring that is fitted; solid and engineered wood flooring and the good news is, both might be sanded and refurbished to look as new as the day. As it includes an identical construction engineered wooden flooring will often be mistaken for laminate. Engineered wood flooring includes a thin layer of real wood, typically between 3-5 millimeters bonded to your base of ply or MDF board, because of its construction and that it is fitted together using a tongue and groove, additionally, it stays quite level.
This means if sanded correctly you must only need to sand off significantly less when compared to a millimeter, so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it's going to employ a similar look to engineered at first glance, but it will likely be built completely of just one piece of wood in the top layer of the base. Solid wood flooring will inevitably cost more to buy and is more expensive to make, but for me, it isn't as good a product as engineered as it is more vulnerable to warping.