Vinyl Wood Flooring Roll - One question I've been asked time and again on the years working in the wood flooring business is; can my old fitted wooden floor be sanded and refurbished? Most people understand what to do using a fitted wooden flooring is a little more confusing, although that original floor boards or parquet floors may be sanded back to create a finished flooring that is wonderful.
Firstly you must discover that it is wood, and most importantly which type of flooring you have. I'm afraid the only alternative would be to replace it in case your flooring is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it's actually a wood effect print stuck using a lacquer on top to either an MDF or plywood board, sanding it would only sand off the paint and ruin the floor.
There are two kinds of fitted wooden flooring; solid and engineered wood flooring and also the great news is, both may be sanded and refurbished to look as new as the day they were fitted. As it features a similar construction, engineered wooden flooring can occasionally be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, generally between 3-5 millimeters bonded to your foundation of ply or MDF board, because that it's fitted together using a tongue and groove and of its construction, it also stays very level.
This means if sanded correctly you must just need to sand off significantly less when compared to a millimeter, or so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it will employ a similar look to engineered at first glance, but nevertheless, it will likely be assembled completely of one piece of wood in the surface of the foundation. Solid wood flooring certainly will necessarily cost a lot more to buy and is more expensive to make, but for me, it's not as good engineered as it's more prone to warping.