Intermountain Wood Flooring Salt Lake City - One question I've been asked time and again over the years working in the wood flooring business is; can my old fitted wooden floor refurbished and be sanded? Many people know that parquet floors or first floor boards may be sanded back to produce a wonderful finished floor, but things to do with a fitted wooden floor is a bit more confusing.
Firstly you have to discover that it is wood, and most importantly what sort of floor you might have. If your floor is a wood effect laminate then I am afraid the sole alternative would be to replace it. Laminate flooring comes in varying level of quality, but most of the time it's actually a wood effect print stuck to either an MDF or plywood plank using a lacquer on top, sanding it'd only sand the paint off and ruin the floor.
There are just two kinds of wooden flooring that is fitted; the great news and also solid and engineered wood flooring is, both refurbished and could be sanded to look as new as the day. As it includes the same construction, engineered wooden flooring will often be mistaken for laminate. Engineered wood flooring includes a thin layer of real wood, generally between 3-5 mm bonded to your foundation of ply or MDF board, because that it is fitted together using a tongue and groove and of its construction, it also stays quite level.
This means if sanded accurately you should only have to sand off less than a millimeter, so the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it is going to have an extremely similar appearance to engineered on the surface, but nevertheless, it will likely be constructed entirely of just one piece of wood in the face of the foundation. Solid wood flooring certainly will necessarily cost more to buy and is more expensive to make, but for me, it isn't as good a product as engineered as it's more prone to warping.