Mirage Wood Flooring Distributors - One question I've been asked time and again over the years working in the wood flooring business is; can my old wooden floor that is fitted be sanded and refurbished? Lots of people have a wooden floor inside their house that has been down for 6-10 years that is looking tired, boring, has scratches or stains in and has definitely seen better days. A lot of folks know that original floor boards or parquet floors could be sanded back to create a finished floor that is wonderful, having a fitted wooden floor is a little more confusing, but what things to do.
You should learn that it's wood, and most importantly which type of floor you might have. If your floor is a wood effect laminate then I'm afraid the only alternative is to replace it.
There are two types of wooden flooring that is fitted; engineered and solid wood flooring and also the great news is, both might be sanded and refurbished to look as new as the day they were fitted. As it's the same construction engineered wooden flooring can sometimes be mistaken for laminate. Engineered wood flooring includes a thin layer of real wood, generally between 3-5 millimeters bonded to a foundation of ply or MDF board, due to its construction and that it is fitted together using a tongue and groove, additionally, it remains quite flat.
This means if sanded accurately you must only need to sand off significantly less than a millimeter, or so the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it'll employ a similar look to engineered on the surface, but nevertheless, it will be built completely of one piece of wood from the top layer of the foundation. Solid wood flooring will inevitably cost more to buy and is more expensive to make, but in my opinion, it isn't as good engineered as it's more prone to warping.