Wood Floor Framing Calculator - One question I have already been asked time and again over the years working in the wood flooring industry is; can my old wooden floor that is fitted refurbished and be sanded? Many folks understand what things to do having a fitted wooden flooring is a bit more confusing, although that first floor boards or parquet floors may be sanded back to make a finished flooring that is lovely.
You must discover what sort of flooring you have, and most importantly it is wood. I'm afraid the sole alternative is to replace it, if your flooring is a wood effect laminate then.
There are just two kinds of wooden flooring that is fitted; engineered and solid wood flooring along with the good thing is, both refurbished and can be sanded to look as new as the day they were fitted. Engineered wooden flooring will often be mistaken for laminate as it includes the same building. Engineered wood flooring includes a thin layer of real wood, usually between 3-5 mm bonded to a foundation of either MDF or ply board, because of its building and that it is fitted together with a tongue and groove, it also remains really flat.
This means if sanded right you need to just have to sand off less when compared to a millimeter, or so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it is going to have a very similar look to engineered on the surface, but it will likely be assembled entirely of just one piece of wood from the face of the foundation. Solid wood flooring is more expensive to make and certainly will necessarily cost more to purchase, but in my opinion, it is not as great engineered as it's more inclined to warping.