Bella Cera Engineered Wood Flooring

124 views

Bella Cera Engineered Wood Flooringspecial promotions best flooring choices


Bella Cera Engineered Wood Flooring - One question I've been asked time and again on the years working in the wood flooring business is; can my old wooden floor that is fitted be sanded and refurbished? A lot of folks realize that first floor boards or parquet floors could be sanded back to create a finished floor that is lovely, having a fitted wooden floor is a little more confusing, but things to do.

Firstly you must find out what type of floor you have, & most importantly that it's wood. I'm afraid the only real option would be to replace it, if your floor is a wood effect laminate then. Laminate flooring comes in varying level of quality, but most of the time it is basically a wood effect print stuck to either an MDF or plywood plank using a lacquer on top, sanding it destroy the floor and would only sand the paint off.


There are two kinds of fitted wooden flooring; the great news along with solid and engineered wood flooring is, both refurbished and can be sanded to look as new as the day. As it features an identical construction, engineered wooden flooring can occasionally be mistaken for laminate. Engineered wood flooring includes a thin layer of real wood, usually between 3-5 millimeters bonded to your foundation of MDF or ply board, because that it's fitted together using a tongue and groove and of its construction, it also stays very flat.

This implies if sanded accurately you need to just have to sand off significantly less when compared to a millimeter, or so the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it is going to possess a similar appearance to engineered on the surface, but it will be built entirely of just one piece of wood in the face of the foundation. Solid wood flooring is more expensive to make and will inevitably cost a lot more to purchase, but in my opinion, it isn't as good a product as engineered as it is more prone to warping.