Measure Wood Flooring - One question I have been asked time and again on the years working in the wood flooring business is; can my old fitted wooden floor refurbished and be sanded? A lot of people know what things to do using a fitted wooden flooring is a little more confusing, although that first floor boards or parquet floors could be sanded back to make a finished flooring that is lovely.
Firstly you have to determine that it's wood, and most importantly what sort of flooring you might have. I am afraid the only option would be to replace it in case your flooring is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it is actually a wood effect print stuck using a lacquer on top to an MDF or plywood plank, sanding it'd only sand off the paint and destroy the floor.
There are just two kinds of fitted wooden flooring; the good thing along with engineered and solid wood flooring is, both might be sanded and refurbished to look as new as the day. As it has the same building, engineered wooden flooring can sometimes be mistaken for laminate. Engineered wood flooring includes a thin layer of real wood, generally between 3-5 mm bonded to a base of MDF or ply board, because of its building and that it's fitted together using a tongue and groove, additionally, it stays very flat.
This means if sanded correctly you need to only need to sand off significantly less than a millimeter, so the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it'll possess a similar appearance to engineered on the surface, but nevertheless, it will likely be assembled completely of one piece of wood from your surface of the base. Solid wood flooring is more expensive to make and certainly will necessarily cost a lot more to purchase, but in my opinion, it isn't as great a product as engineered as it is more prone to warping.