Wood Flooring Long Island City - One question I have already been asked time and again on the years working in the wood flooring industry is; can my old fitted wooden floor be sanded and refurbished? A lot of people have a wooden floor in their house that's been down for 6-10 years which is appearing tired, boring, has stains or scratches in and has definitely seen better days. Many folks understand things to do using a fitted wooden floor is a little more confusing, although that original floor boards or parquet floors could be sanded back to make a finished floor that is lovely.
You need to learn that it is wood, & most importantly which kind of floor you've got. If your floor is a wood effect laminate then I am afraid the only option would be to replace it.
There are just two forms of fitted wooden flooring; solid and engineered wood flooring and the great news is, both can be sanded and refurbished to look as new as the day. As it has the same construction, engineered wooden flooring can occasionally be mistaken for laminate. Engineered wood flooring includes a thin layer of real wood, typically between 3-5 mm bonded to some foundation of MDF or ply board, because of its construction and that it is fitted together using a tongue and groove, it also stays very flat.
This means if sanded accurately you must just need to sand off less than the usual millimeter, therefore the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it will employ a similar appearance to engineered on the surface, but nevertheless, it will likely be constructed entirely of just one piece of wood in the face of the foundation. Solid wood flooring is more expensive to make and will inevitably cost a lot more to purchase, but for me, it isn't as good engineered as it's more prone to warping.