Shelf Floor Lamp With Wood Shelves - One question I have been asked time and again on the years working in the wood flooring industry is; can my old fitted wooden floor refurbished and be sanded? Many folks know that parquet floors or original floor boards can be sanded back to make a lovely finished floor, but things to do using a fitted wooden floor is a little more confusing.
Firstly you need to determine what sort of floor you might have, and most importantly it is wood. I'm afraid the only real alternative would be to replace it, if your floor is a wood effect laminate then.
There are two types of fitted wooden flooring; solid and engineered wood flooring as well as the good thing is, both could be sanded and refurbished to look as new as the day they were fitted. Engineered wooden flooring will often be mistaken for laminate as it has the same building. Engineered wood flooring has a thin layer of real wood, typically between 3-5 mm bonded to some foundation of either ply or MDF board, because that it is fitted together using a tongue and groove and of its building, additionally, it stays really level.
This implies if sanded right you ought to just need to sand off significantly less than a millimeter, so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it's going to possess a similar appearance to engineered at first glance, but nevertheless, it will likely be assembled entirely of just one piece of wood from the surface of the foundation. Solid wood flooring is more expensive to make and will inevitably cost a lot more to purchase, but for me, it isn't as good engineered as it is more inclined to warping.