Most Popular Wood Floor Color 2012 - One question I have already been asked time and again on the years working in the wood flooring business is; can my old fitted wooden floor refurbished and be sanded? Many people have a wooden floor inside their house which has been down for 6-10 years which is looking tired, dull, has spots or scratches in and has definitely seen better days. Most folks understand that parquet floors or original floor boards may be sanded back to create a wonderful finished flooring, but what to do using a fitted wooden flooring is a bit more confusing.
You must determine that it is wood, and most importantly which kind of flooring you have. I'm afraid the only real alternative is to replace it if your flooring is a wood effect laminate then. Laminate flooring comes in varying level of quality, but most of the time it is actually a wood effect print stuck to an MDF or plywood board with a lacquer on top, sanding it'd only sand the paint off and destroy the floor.
There are two forms of fitted wooden flooring; the great news along with solid and engineered wood flooring is, both may be sanded and refurbished to look as new as the day. Engineered wooden flooring can occasionally be mistaken for laminate as it has an identical construction. Engineered wood flooring includes a thin layer of real wood, generally between 3-5 millimeters bonded to a foundation of either MDF or ply board, because that it's fitted together with a tongue and groove and of its construction, it also stays quite level.
This means if sanded accurately you must only need to sand off less than the usual millimeter, therefore the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it's going to employ a similar look to engineered on the surface, but nevertheless, it'll be constructed completely of one piece of wood from the surface of the foundation. Solid wood flooring is more expensive to make and certainly will inevitably cost more to purchase, but in my opinion, it is not as great engineered as it is more prone to warping.