Peel And Stick Floor Tile That Looks Like Wood - One question I have been asked time and again over the years working in the wood flooring business is; can my old wooden floor that is fitted refurbished and be sanded? Many people know what to do with a fitted wooden flooring is a little more confusing, although that first floor boards or parquet floors can be sanded back to produce a finished flooring that is wonderful.
You have to learn that it's wood, and most importantly which type of flooring you might have. I'm afraid the only real alternative is to replace it if your flooring is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it is essentially a wood effect print stuck to either an MDF or plywood board with a lacquer on top, sanding it ruin the floor and would only sand off the paint.
There are two types of wooden flooring that is fitted; solid and engineered wood flooring and also the great news is, both might be sanded and refurbished to look as new as the day they were fitted. As it has the same building engineered wooden flooring can occasionally be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, typically between 3-5 millimeters bonded to a base of either ply or MDF board, because that it's fitted together with a tongue and groove and of its building, it also remains really level.
This means if sanded accurately you must only have to sand off significantly less when compared to a millimeter, or so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it's going to have a very similar look to engineered on the surface, but it will likely be assembled completely of one piece of wood from your top layer of the base. Solid wood flooring is more expensive to make and certainly will necessarily cost more to purchase, but for me, it is not as good engineered as it is more prone to warping.