Olive Oil On Wood Floors - One question I've been asked time and again on the years working in the wood flooring industry is; can my old fitted wooden floor be sanded and refurbished? Most people know that first floor boards or parquet floors might be sanded back to create a finished floor that is lovely, having a fitted wooden floor is a little more confusing, but what to do.
Firstly you must learn that it's wood, & most importantly what sort of floor you've got. I am afraid the only real alternative would be to replace it, if your floor is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it is essentially a wood effect print stuck to either an MDF or plywood board with a lacquer on top, sanding it would only sand the paint off and destroy the floor.
There are just two types of fitted wooden flooring; solid and engineered wood flooring as well as the good news is, both can be sanded and refurbished to look as new as the day. As it has a similar construction, engineered wooden flooring can occasionally be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, usually between 3-5 millimeters bonded to a foundation of MDF or ply board, because that it's fitted together with a tongue and groove and of its construction, it also remains really flat.
This implies if sanded correctly you ought to just have to sand off less than the usual millimeter, therefore the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it'll possess a similar appearance to engineered at first glance, but nevertheless, it will likely be constructed completely of just one piece of wood from your surface of the foundation. Solid wood flooring is more expensive to make and will necessarily cost more to buy, but for me, it's not as good engineered as it is more vulnerable to warping.