Polish Wood Floor Scratches - One question I've been asked time and again on the years working in the wood flooring business is; can my old wooden floor that is fitted refurbished and be sanded? Lots of people have a wooden floor inside their house that has been down for 6-10 years which is looking tired, boring, has scratches or stains in and has definitely seen better days. Most people understand what to do with a fitted wooden flooring is a bit more confusing, although that first floor boards or parquet floors could be sanded back to create a finished flooring that is lovely.
Firstly you should discover that it is wood, and most importantly which kind of flooring you have. I am afraid the only option is to replace it, in case your flooring is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it is actually a wood effect print stuck to an MDF or plywood board using a lacquer on top, sanding it'd sand off the paint and ruin the floor.
There are two types of wooden flooring that is fitted; solid and engineered wood flooring as well as the great news is, both refurbished and might be sanded to look as new as the day. As it has a similar building, engineered wooden flooring can sometimes be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, generally between 3-5 millimeters bonded to a base of either MDF or ply board, due to its building and that it's fitted together using a tongue and groove, additionally, it remains very level.
This means if sanded right you must just need to sand off significantly less than a millimeter, therefore the floor can usually be sanded up to 3 times If your floor is solid wood flooring it will employ a similar look to engineered on the surface, but nevertheless, it will likely be constructed entirely of one piece of wood from the surface of the base. Solid wood flooring is more expensive to make and will inevitably cost a lot more to buy, but in my opinion, it is not as good a product as engineered as it is more vulnerable to warping.