Wood Look Tile Floor And Decor - One question I've been asked time and again over the years working in the wood flooring business is; can my old fitted wooden floor refurbished and be sanded? Lots of people have a wooden floor inside their house that has been down for 6-10 years which is looking tired, boring, has stains or scratches in and has definitely seen better days. A lot of people know that original floor boards or parquet floors may be sanded back to produce a finished floor that is wonderful, having a fitted wooden floor is a bit more confusing, but what to do.
You should discover which type of floor you've got, and most importantly that it's wood. I am afraid the only real alternative would be to replace it if your floor is a wood effect laminate then.
There are just two types of wooden flooring that is fitted; solid and engineered wood flooring and the good news is, both refurbished and might be sanded to look as new as the day they were fitted. As it features the same construction engineered wooden flooring can sometimes be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, usually between 3-5 mm bonded to some foundation of MDF or ply board, because of its construction and that it is fitted together with a tongue and groove, additionally, it stays really flat.
This implies if sanded correctly you must only need to sand off significantly less when compared to a millimeter, therefore the floor can usually be sanded up to 3 times If your floor is solid wood flooring it's going to have a very similar appearance to engineered on the surface, but nevertheless, it will likely be built entirely of just one piece of wood in the top layer of the foundation. Solid wood flooring is more expensive to make and will inevitably cost a lot more to purchase, but for me, it's not as good engineered as it's more inclined to warping.