Alternative To Real Wood Flooring - One question I've been asked time and again over the years working in the wood flooring business is; can my old wooden floor that is fitted be sanded and refurbished? Most people understand that original floor boards or parquet floors could be sanded back to produce a finished floor that is wonderful, with a fitted wooden floor is a little more confusing, but things to do.
Firstly you must determine that it is wood, & most importantly what type of floor you might have. I'm afraid the only alternative is to replace it, if your floor is a wood effect laminate then.
There are just two types of wooden flooring that is fitted; engineered and solid wood flooring along with the good thing is, both refurbished and may be sanded to look as new as the day they were fitted. Engineered wooden flooring will often be mistaken for laminate as it includes an identical construction. Engineered wood flooring includes a thin layer of real wood, generally between 3-5 millimeters bonded to a foundation of either ply or MDF board, because that it is fitted together with a tongue and groove and of its construction, it also stays really flat.
This implies if sanded right you should only need to sand off significantly less than the usual millimeter, so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it is going to have an extremely similar appearance to engineered on the surface, but nevertheless, it will be constructed entirely of just one piece of wood from the face of the foundation. Solid wood flooring certainly will inevitably cost a lot more to buy and is more expensive to make, but for me, it's not as great engineered as it's more inclined to warping.