Wood Floor Glue Injection Kit


Wood Floor Glue Injection Kitpro injector urethane wood floor urethane

Wood Floor Glue Injection Kit - One question I've been asked time and again on the years working in the wood flooring business is; can my old fitted wooden floor refurbished and be sanded? Many people have a wooden floor in their own house that's been down for 6-10 years which is looking tired, dull, has scratches or stains in and has definitely seen better days. Most people realize that parquet floors or first floor boards might be sanded back to make a lovely finished flooring, but things to do with a fitted wooden flooring is a bit more confusing.

You need to learn it is wood, and most importantly what sort of flooring you have. I'm afraid the only option is to replace it in case your flooring is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it's essentially a wood effect print stuck to either an MDF or plywood plank using a lacquer on top, sanding it destroy the floor and would only sand off the paint.

There are two forms of fitted wooden flooring; the good thing as well as solid and engineered wood flooring is, both can be sanded and refurbished to look as new as the day. Engineered wooden flooring will often be mistaken for laminate as it has the same construction. Engineered wood flooring includes a thin layer of real wood, typically between 3-5 mm bonded to a foundation of MDF or ply board, because that it is fitted together using a tongue and groove and of its construction, it also stays very level.

This implies if sanded correctly you must only have to sand off less when compared to a millimeter, therefore the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it's going to have a very similar look to engineered at first glance, but it will be constructed entirely of just one piece of wood in the face of the foundation. Solid wood flooring will necessarily cost more to buy and is more expensive to make, but in my opinion, it is not as great a product as engineered as it's more vulnerable to warping.