Brazilian Walnut Engineered Wood Flooring - One question I've been asked time and again over the years working in the wood flooring industry is; can my old wooden floor that is fitted be sanded and refurbished? Most folks understand that first floor boards or parquet floors may be sanded back to create a finished floor that is lovely, having a fitted wooden floor is a little more confusing, but what things to do.
Firstly you should find out that it's wood, & most importantly what kind of floor you might have. If your floor is a wood effect laminate then I'm afraid the sole option would be to replace it.
There are just two kinds of fitted wooden flooring; the great news and engineered and solid wood flooring is, both could be sanded and refurbished to look as new as the day. As it's the same building, engineered wooden flooring can sometimes be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, typically between 3-5 millimeters bonded to your foundation of either MDF or ply board, because of its building and that it is fitted together with a tongue and groove, it also stays very level.
This means if sanded accurately you need to just have to sand off less than the usual millimeter, so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it's going to possess a similar look to engineered at first glance, but it will be constructed completely of one piece of wood in the top layer of the foundation. Solid wood flooring certainly will necessarily cost a lot more to purchase and is more expensive to make, but for me, it is not as good a product as engineered as it is more prone to warping.