Soundproofing Wood Floor Condo - One question I've been asked time and again on the years working in the wood flooring industry is; can my old fitted wooden floor refurbished and be sanded? A lot of people know what to do with a fitted wooden flooring is a little more confusing, although that first floor boards or parquet floors might be sanded back to make a finished flooring that is lovely.
You must determine what kind of flooring you have, & most importantly it is wood. I'm afraid the only real alternative would be to replace it if your flooring is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it is essentially a wood effect print stuck using a lacquer on top to an MDF or plywood plank, sanding it ruin the floor and would sand the paint off.
There are two forms of wooden flooring that is fitted; solid and engineered wood flooring and also the good thing is, both can be sanded and refurbished to look as new as the day they were fitted. As it features an identical building, engineered wooden flooring can occasionally be mistaken for laminate. Engineered wood flooring includes a thin layer of real wood, usually between 3-5 millimeters bonded to your base of MDF or ply board, because that it's fitted together using a tongue and groove and of its building, it also remains quite level.
This implies if sanded correctly you must just need to sand off significantly less than the usual millimeter, so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it'll employ a similar look to engineered at first glance, but nevertheless, it'll be constructed completely of one piece of wood from your top layer of the base. Solid wood flooring is more expensive to make and certainly will necessarily cost more to buy, but in my opinion, it is not as great engineered as it is more vulnerable to warping.