Attach Wood Plate To Concrete Floor - One question I've been asked time and again on the years working in the wood flooring business is; can my old fitted wooden floor refurbished and be sanded? Many people have a wooden floor inside their house that has been down for 6-10 years that's appearing tired, lifeless, has scratches or spots in and has definitely seen better days. A lot of people realize that parquet floors or first floor boards may be sanded back to produce a wonderful finished floor, but what to do with a fitted wooden floor is a little more confusing.
Firstly you need to learn that it is wood, and most importantly which type of floor you might have. I am afraid the only real option would be to replace it in case your floor is a wood effect laminate then.
There are just two kinds of fitted wooden flooring; solid and engineered wood flooring and the great news is, both can be sanded and refurbished to look as new as the day they were fitted. Engineered wooden flooring will often be mistaken for laminate as it's a similar construction. Engineered wood flooring includes a thin layer of real wood, typically between 3-5 mm bonded to your foundation of either MDF or ply board, due to its construction and that it is fitted together using a tongue and groove, additionally, it stays very level.
This implies if sanded correctly you need to just need to sand off significantly less than a millimeter, or so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it's going to have an extremely similar look to engineered at first glance, but it'll be constructed completely of just one piece of wood in the face of the foundation. Solid wood flooring is more expensive to make and will necessarily cost a lot more to buy, but for me, it isn't as good engineered as it's more vulnerable to warping.