Bona Wood Floor Coating - One question I have already been asked time and again over the years working in the wood flooring business is; can my old wooden floor that is fitted be sanded and refurbished? A lot of folks realize that parquet floors or first floor boards could be sanded back to create a lovely finished flooring, but what to do with a fitted wooden flooring is a little more confusing.
You have to discover which type of flooring you've got, & most importantly it is wood. I am afraid the only real alternative would be to replace it in case your flooring is a wood effect laminate then. Laminate flooring comes in varying level of quality, but most of the time it is basically a wood effect print stuck to an MDF or plywood plank using a lacquer on top, sanding it destroy the floor and would sand the paint off.
There are two types of fitted wooden flooring; the great news and engineered and solid wood flooring is, both might be sanded and refurbished to look as new as the day they were fitted. As it has the same building, engineered wooden flooring will often be mistaken for laminate. Engineered wood flooring includes a thin layer of real wood, generally between 3-5 millimeters bonded to some foundation of MDF or ply board, because that it is fitted together using a tongue and groove and of its building, it also remains quite level.
This implies if sanded correctly you ought to just have to sand off significantly less than the usual millimeter, so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it'll employ a similar look to engineered on the surface, but it will be constructed entirely of just one piece of wood in the surface of the foundation. Solid wood flooring is more expensive to make and will necessarily cost a lot more to purchase, but for me, it is not as great a product as engineered as it is more prone to warping.