3 8 Engineered Wood Flooring Stapler

108 views

3 8 Engineered Wood Flooring Staplerbruce wheat oak 38 in thick x 3 in wide x varying length


3 8 Engineered Wood Flooring Stapler - One question I've been asked time and again over the years working in the wood flooring business is; can my old fitted wooden floor be sanded and refurbished? Most people realize that original floor boards or parquet floors can be sanded back to produce a finished floor that is lovely, having a fitted wooden floor is a bit more confusing, but things to do.

You must find out it is wood, & most importantly what type of floor you might have. If your floor is a wood effect laminate then I am afraid the only option is to replace it.


There are just two kinds of fitted wooden flooring; the good news as well as solid and engineered wood flooring is, both may be sanded and refurbished to look as new as the day they were fitted. As it features a similar building engineered wooden flooring will often be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, usually between 3-5 millimeters bonded to some base of either MDF or ply board, due to its building and that it's fitted together with a tongue and groove, additionally, it stays very level.

This implies if sanded right you should only have to sand off less when compared to a millimeter, so the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it's going to have a very similar appearance to engineered at first glance, but nevertheless, it'll be assembled entirely of just one piece of wood in the surface of the base. Solid wood flooring will inevitably cost more to purchase and is more expensive to make, but for me, it isn't as good engineered as it is more prone to warping.