Amtico Spacia Wood Effect Flooring - One question I have already been asked time and again on the years working in the wood flooring business is; can my old fitted wooden floor be sanded and refurbished? Most people understand that parquet floors or first floor boards could be sanded back to make a wonderful finished floor, but what things to do having a fitted wooden floor is a little more confusing.
Firstly you must learn which type of floor you've got, & most importantly that it is wood. I'm afraid the sole option would be to replace it in case your floor is a wood effect laminate then.
There are just two types of wooden flooring that is fitted; the good thing and engineered and solid wood flooring is, both might be sanded and refurbished to look as new as the day. As it's an identical construction engineered wooden flooring will often be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, typically between 3-5 mm bonded to your base of either MDF or ply board, because that it is fitted together with a tongue and groove and of its construction, additionally, it stays very flat.
This implies if sanded right you need to just have to sand off less than the usual millimeter, or so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it is going to have a very similar look to engineered on the surface, but it will be assembled completely of just one piece of wood from the top layer of the base. Solid wood flooring will inevitably cost a lot more to purchase and is more expensive to make, but for me, it's not as good engineered as it's more inclined to warping.