Linseed Oil For Wood Floors - One question I have been asked time and again on the years working in the wood flooring industry is; can my old fitted wooden floor refurbished and be sanded? A lot of people have a wooden floor in their house which has been down for 6-10 years that is appearing tired, lifeless, has stains or scratches in and has definitely seen better days. Most people know that parquet floors or original floor boards could be sanded back to make a wonderful finished floor, but what things to do using a fitted wooden floor is a little more confusing.
You have to learn that it's wood, & most importantly which kind of floor you've got. If your floor is a wood effect laminate then I am afraid the only alternative is to replace it. Laminate flooring comes in varying level of quality, but most of the time it's essentially a wood effect print stuck with a lacquer on top to either an MDF or plywood plank, sanding it'd sand the paint off and ruin the floor.
There are just two types of fitted wooden flooring; the great news and engineered and solid wood flooring is, both might be sanded and refurbished to look as new as the day they were fitted. As it includes a similar construction engineered wooden flooring can occasionally be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, typically between 3-5 mm bonded to some foundation of either MDF or ply board, because that it's fitted together with a tongue and groove and of its construction, it also remains really flat.
This implies if sanded correctly you should only have to sand off less when compared to a millimeter, or so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it's going to have an extremely similar appearance to engineered on the surface, but nevertheless, it'll be constructed entirely of just one piece of wood in the face of the foundation. Solid wood flooring is more expensive to make and certainly will inevitably cost a lot more to buy, but for me, it's not as great a product as engineered as it's more inclined to warping.