Best Engineered Wood Flooring For Radiant Heat


Best Engineered Wood Flooring For Radiant Heat74 best images about hardwood floors and radiant heating on

Best Engineered Wood Flooring For Radiant Heat - One question I've been asked time and again over the years working in the wood flooring industry is; can my old wooden floor that is fitted be sanded and refurbished? A lot of people have a wooden floor in their house that has been down for 6-10 years that's appearing tired, dull, has spots or scratches in and has definitely seen better days. Many people understand that parquet floors or first floor boards can be sanded back to make a wonderful finished flooring, but things to do with a fitted wooden flooring is a bit more confusing.

You have to determine what kind of flooring you have, & most importantly that it is wood. I'm afraid the sole alternative is to replace it if your flooring is a wood effect laminate then. Laminate flooring comes in varying level of quality, but most of the time it is basically a wood effect print stuck to an MDF or plywood board using a lacquer on top, sanding it destroy the floor and would sand the paint off.

There are two kinds of wooden flooring that is fitted; solid and engineered wood flooring and the good news is, both refurbished and can be sanded to look as new as the day. Engineered wooden flooring can occasionally be mistaken for laminate as it includes an identical construction. Engineered wood flooring has a thin layer of real wood, typically between 3-5 millimeters bonded to your base of either MDF or ply board, due to its construction and that it is fitted together using a tongue and groove, additionally, it remains really flat.

This means if sanded right you must only need to sand off less when compared to a millimeter, so the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it is going to have an extremely similar appearance to engineered on the surface, but nevertheless, it will be assembled entirely of one piece of wood from the face of the base. Solid wood flooring will inevitably cost more to buy and is more expensive to make, but in my opinion, it isn't as good a product as engineered as it is more prone to warping.