Recoating Polyurethane Wood Floor Finish - One question I've been asked time and again over the years working in the wood flooring business is; can my old wooden floor that is fitted be sanded and refurbished? A lot of folks realize that parquet floors or original floor boards can be sanded back to produce a lovely finished flooring, but what to do with a fitted wooden flooring is a little more confusing.
You have to learn that it is wood, and most importantly what type of flooring you've got. I'm afraid the only real option is to replace it in case your flooring is a wood effect laminate then. Laminate flooring comes in varying level of quality, but most of the time it's actually a wood effect print stuck to either an MDF or plywood board with a lacquer on top, sanding it destroy the floor and would only sand off the paint.
There are two forms of wooden flooring that is fitted; the good thing and solid and engineered wood flooring is, both refurbished and can be sanded to look as new as the day. Engineered wooden flooring will often be mistaken for laminate as it includes an identical building. Engineered wood flooring includes a thin layer of real wood, usually between 3-5 millimeters bonded to some base of either MDF or ply board, due to its building and that it's fitted together with a tongue and groove, it also stays quite flat.
This means if sanded right you ought to only have to sand off less when compared to a millimeter, or so the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it is going to possess a similar look to engineered on the surface, but it will likely be built completely of just one piece of wood from your surface of the base. Solid wood flooring certainly will necessarily cost more to purchase and is more expensive to make, but in my opinion, it isn't as great engineered as it's more prone to warping.