Best Wood Floor Shiner - One question I've been asked time and again on the years working in the wood flooring business is; can my old wooden floor that is fitted refurbished and be sanded? A lot of folks understand that parquet floors or original floor boards might be sanded back to create a wonderful finished floor, but what to do with a fitted wooden floor is a bit more confusing.
You should learn what sort of floor you've got, and most importantly that it's wood. In case your floor is a wood effect laminate then I am afraid the sole option would be to replace it.
There are just two kinds of fitted wooden flooring; the good thing along with engineered and solid wood flooring is, both may be sanded and refurbished to look as new as the day they were fitted. As it has the same building, engineered wooden flooring can occasionally be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, generally between 3-5 millimeters bonded to a base of either MDF or ply board, because that it is fitted together using a tongue and groove and of its building, it also stays quite flat.
This implies if sanded correctly you must only need to sand off less than the usual millimeter, so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it's going to possess a similar appearance to engineered on the surface, but nevertheless, it will likely be assembled completely of just one piece of wood in the surface of the base. Solid wood flooring certainly will necessarily cost more to buy and is more expensive to make, but in my opinion, it's not as good engineered as it is more inclined to warping.