Haro Parquet Wood Flooring - One question I have already been asked time and again on the years working in the wood flooring business is; can my old wooden floor that is fitted refurbished and be sanded? Many people understand that first floor boards or parquet floors may be sanded back to create a finished floor that is lovely, using a fitted wooden floor is a little more confusing, but what things to do.
You have to learn which type of floor you've got, & most importantly that it is wood. I'm afraid the only option would be to replace it, if your floor is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it is essentially a wood effect print stuck to an MDF or plywood board with a lacquer on top, sanding it would sand the paint off and destroy the floor.
There are just two forms of wooden flooring that is fitted; solid and engineered wood flooring and the good thing is, both refurbished and might be sanded to look as new as the day. Engineered wooden flooring can occasionally be mistaken for laminate as it has a similar construction. Engineered wood flooring has a thin layer of real wood, usually between 3-5 millimeters bonded to some foundation of either ply or MDF board, because that it's fitted together with a tongue and groove and of its construction, additionally, it stays really level.
This implies if sanded correctly you need to just have to sand off less when compared to a millimeter, or so the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it's going to possess a similar look to engineered on the surface, but nevertheless, it'll be constructed entirely of just one piece of wood from your face of the foundation. Solid wood flooring will inevitably cost a lot more to purchase and is more expensive to make, but for me, it isn't as good engineered as it is more inclined to warping.