Urine Gone Wood Floors - One question I have been asked time and again on the years working in the wood flooring industry is; can my old wooden floor that is fitted be sanded and refurbished? Several people have a wooden floor inside their house that's been down for 6-10 years which is looking tired, lifeless, has scratches or stains in and has definitely seen better days. A lot of people understand what things to do having a fitted wooden flooring is a bit more confusing, although that original floor boards or parquet floors may be sanded back to produce a finished flooring that is lovely.
Firstly you should find out it is wood, and most importantly what kind of flooring you've got. I am afraid the sole option would be to replace it, if your flooring is a wood effect laminate then. Laminate flooring comes in varying level of quality, but most of the time it is actually a wood effect print stuck to an MDF or plywood plank using a lacquer on top, sanding it would only sand off the paint and ruin the floor.
There are just two forms of fitted wooden flooring; engineered and solid wood flooring and also the good news is, both refurbished and can be sanded to look as new as the day. Engineered wooden flooring will often be mistaken for laminate as it's the same building. Engineered wood flooring has a thin layer of real wood, generally between 3-5 millimeters bonded to a base of either MDF or ply board, because that it is fitted together using a tongue and groove and of its building, additionally, it stays very flat.
This means if sanded correctly you should only have to sand off significantly less than a millimeter, therefore the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it will employ a similar appearance to engineered at first glance, but nevertheless, it will likely be constructed entirely of just one piece of wood from the face of the base. Solid wood flooring is more expensive to make and will inevitably cost more to buy, but in my opinion, it is not as great a product as engineered as it is more prone to warping.