Caring For Old Wood Floors - One question I've been asked time and again over the years working in the wood flooring industry is; can my old wooden floor that is fitted be sanded and refurbished? Many people realize that parquet floors or original floor boards could be sanded back to make a wonderful finished floor, but what to do with a fitted wooden floor is a bit more confusing.
You should learn which kind of floor you might have, and most importantly it is wood. I am afraid the only real option is to replace it if your floor is a wood effect laminate then. Laminate flooring comes in varying level of quality, but most of the time it is basically a wood effect print stuck to either an MDF or plywood plank with a lacquer on top, sanding it ruin the floor and would sand off the paint.
There are two types of fitted wooden flooring; the great news as well as solid and engineered wood flooring is, both could be sanded and refurbished to look as new as the day. Engineered wooden flooring will often be mistaken for laminate as it features the same building. Engineered wood flooring has a thin layer of real wood, generally between 3-5 mm bonded to some foundation of either ply or MDF board, because that it is fitted together with a tongue and groove and of its building, additionally, it remains quite flat.
This implies if sanded right you need to only have to sand off significantly less when compared to a millimeter, therefore the floor can usually be sanded up to 3 times If your floor is solid wood flooring it'll possess a similar look to engineered on the surface, but it'll be assembled completely of just one piece of wood in the face of the foundation. Solid wood flooring is more expensive to make and certainly will necessarily cost more to buy, but for me, it isn't as great a product as engineered as it is more prone to warping.