Laminate Wood Floor Sweeper - One question I've been asked time and again on the years working in the wood flooring industry is; can my old fitted wooden floor refurbished and be sanded? Most folks know that original floor boards or parquet floors may be sanded back to produce a finished flooring that is lovely, using a fitted wooden flooring is a little more confusing, but what things to do.
You should learn which type of flooring you might have, & most importantly it is wood. I'm afraid the only real option would be to replace it, in case your flooring is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it's actually a wood effect print stuck to either an MDF or plywood plank with a lacquer on top, sanding it'd sand off the paint and ruin the floor.
There are just two forms of fitted wooden flooring; the good thing as well as solid and engineered wood flooring is, both could be sanded and refurbished to look as new as the day they were fitted. As it's the same building, engineered wooden flooring can occasionally be mistaken for laminate. Engineered wood flooring has a thin layer of real wood, typically between 3-5 millimeters bonded to a base of ply or MDF board, due to its building and that it is fitted together with a tongue and groove, it also stays very level.
Solid wood flooring certainly will necessarily cost more to purchase and is more expensive to make, but for me, it isn't as great engineered as it's more inclined to warping.