Armstrong Engineered Wood Flooring Underlayment - One question I've been asked time and again over the years working in the wood flooring industry is; can my old wooden floor that is fitted be sanded and refurbished? Several people have a wooden floor in their own house which has been down for 6-10 years which is appearing tired, dull, has scratches or spots in and has definitely seen better days. A lot of folks understand what to do with a fitted wooden floor is a bit more confusing, although that original floor boards or parquet floors might be sanded back to create a finished floor that is lovely.
You have to learn it is wood, & most importantly which kind of floor you've got. I'm afraid the only real option would be to replace it if your floor is a wood effect laminate then. Laminate flooring comes in varying degree of quality, but most of the time it's essentially a wood effect print stuck with a lacquer on top to either an MDF or plywood board, sanding it'd sand the paint off and destroy the floor.
There are two kinds of wooden flooring that is fitted; the good thing and also solid and engineered wood flooring is, both refurbished and might be sanded to look as new as the day they were fitted. As it has an identical building engineered wooden flooring will often be mistaken for laminate. Engineered wood flooring includes a thin layer of real wood, typically between 3-5 millimeters bonded to your base of ply or MDF board, due to its building and that it's fitted together with a tongue and groove, additionally, it stays really flat.
This means if sanded correctly you need to only need to sand off less than a millimeter, so the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it will have an extremely similar look to engineered on the surface, but nevertheless, it will likely be constructed completely of one piece of wood from your surface of the base. Solid wood flooring is more expensive to make and certainly will necessarily cost a lot more to buy, but for me, it is not as great engineered as it's more inclined to warping.