Shark Products For Wood Floors - One question I have been asked time and again over the years working in the wood flooring business is; can my old wooden floor that is fitted refurbished and be sanded? A lot of people have a wooden floor inside their house that has been down for 6-10 years that is looking tired, boring, has scratches or stains in and has definitely seen better days. A lot of folks know what to do with a fitted wooden flooring is a bit more confusing, although that first floor boards or parquet floors might be sanded back to produce a finished flooring that is wonderful.
Firstly you have to discover which kind of flooring you've got, & most importantly it is wood. I'm afraid the sole option is to replace it, in case your flooring is a wood effect laminate then. Laminate flooring comes in varying level of quality, but most of the time it is actually a wood effect print stuck to either an MDF or plywood plank with a lacquer on top, sanding it would only sand off the paint and ruin the floor.
There are just two types of fitted wooden flooring; solid and engineered wood flooring as well as the good news is, both might be sanded and refurbished to look as new as the day. Engineered wooden flooring can occasionally be mistaken for laminate as it has an identical construction. Engineered wood flooring has a thin layer of real wood, typically between 3-5 mm bonded to a foundation of MDF or ply board, because that it is fitted together with a tongue and groove and of its construction, it also stays really flat.
This implies if sanded correctly you ought to only have to sand off significantly less when compared to a millimeter, therefore the floor can usually be sanded up to 3 times If your floor is solid wood flooring it's going to have an extremely similar appearance to engineered on the surface, but nevertheless, it will likely be built entirely of one piece of wood from the top layer of the foundation. Solid wood flooring is more expensive to make and will inevitably cost more to purchase, but in my opinion, it isn't as great a product as engineered as it is more vulnerable to warping.