Narrow Plank Solid Wood Flooring - One question I've been asked time and again over the years working in the wood flooring business is; can my old fitted wooden floor be sanded and refurbished? Many people have a wooden floor in their house that's been down for 6-10 years which is appearing tired, lifeless, has stains or scratches in and has definitely seen better days. Most people realize things to do using a fitted wooden flooring is a bit more confusing, although that original floor boards or parquet floors could be sanded back to produce a finished flooring that is lovely.
You should learn that it's wood, and most importantly what kind of flooring you might have. I'm afraid the only real alternative would be to replace it, in case your flooring is a wood effect laminate then. Laminate flooring comes in varying level of quality, but most of the time it's essentially a wood effect print stuck to either an MDF or plywood plank with a lacquer on top, sanding it destroy the floor and would only sand off the paint.
There are just two kinds of fitted wooden flooring; engineered and solid wood flooring as well as the good thing is, both could be sanded and refurbished to look as new as the day. As it includes an identical construction, engineered wooden flooring will often be mistaken for laminate. Engineered wood flooring includes a thin layer of real wood, usually between 3-5 millimeters bonded to a base of ply or MDF board, due to its construction and that it's fitted together with a tongue and groove, it also remains quite flat.
This implies if sanded right you ought to only need to sand off significantly less than the usual millimeter, so the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it will have a very similar look to engineered on the surface, but nevertheless, it'll be built completely of one piece of wood from your top layer of the base. Solid wood flooring will inevitably cost a lot more to purchase and is more expensive to make, but in my opinion, it isn't as great engineered as it's more prone to warping.