Inlaid Wood Floor Vents - One question I've been asked time and again over the years working in the wood flooring industry is; can my old fitted wooden floor be sanded and refurbished? Lots of people have a wooden floor in their house that's been down for 6-10 years that is looking tired, dull, has spots or scratches in and has definitely seen better days. Many people realize that first floor boards or parquet floors might be sanded back to create a finished flooring that is lovely, with a fitted wooden flooring is a little more confusing, but what to do.
Firstly you must find out what sort of flooring you might have, & most importantly that it is wood. In case your flooring is a wood effect laminate then I'm afraid the sole option is to replace it.
There are two kinds of wooden flooring that is fitted; the good thing and also engineered and solid wood flooring is, both refurbished and could be sanded to look as new as the day. Engineered wooden flooring can sometimes be mistaken for laminate as it includes an identical construction. Engineered wood flooring includes a thin layer of real wood, usually between 3-5 mm bonded to a base of MDF or ply board, because that it is fitted together with a tongue and groove and of its construction, additionally, it remains quite level.
This means if sanded accurately you ought to just have to sand off less when compared to a millimeter, or so the floor can usually be sanded up to 3 times If your floor is solid wood flooring it'll employ a similar look to engineered on the surface, but it will likely be built entirely of one piece of wood in the top layer of the base. Solid wood flooring will inevitably cost a lot more to purchase and is more expensive to make, but for me, it's not as great a product as engineered as it is more vulnerable to warping.
Tags: #inlaid wood floor vents