Thickness Engineered Wood Flooring

317 views

Thickness Engineered Wood Flooringmalibu wide plank french oak mavericks 12 in thick x 7 12 in


Thickness Engineered Wood Flooring - One question I have been asked time and again on the years working in the wood flooring industry is; can my old fitted wooden floor refurbished and be sanded? Many folks know that parquet floors or first floor boards may be sanded back to make a wonderful finished flooring, but what things to do using a fitted wooden flooring is a little more confusing.

You have to learn what kind of flooring you've got, and most importantly it is wood. If your flooring is a wood effect laminate then I'm afraid the only alternative would be to replace it.


There are two types of wooden flooring that is fitted; solid and engineered wood flooring along with the great news is, both refurbished and may be sanded to look as new as the day they were fitted. Engineered wooden flooring can occasionally be mistaken for laminate as it includes a similar building. Engineered wood flooring has a thin layer of real wood, typically between 3-5 millimeters bonded to a base of either MDF or ply board, because of its building and that it's fitted together using a tongue and groove, it also stays very flat.

This implies if sanded right you must only need to sand off less than the usual millimeter, or so the floor can usually be sanded up to 3 times In Case your floor is solid wood flooring it's going to employ a similar look to engineered on the surface, but it will be constructed entirely of one piece of wood from your surface of the base. Solid wood flooring certainly will inevitably cost a lot more to buy and is more expensive to make, but in my opinion, it isn't as great a product as engineered as it is more vulnerable to warping.